04-console.jpg	Red+Blue wires fitted for inertia switch override.
05-scope.jpg	Scope on the injector harness.
07-20us.jpg	Only just open and hold:  1.6us on, 0.4us off!
06-10ms.jpg	3.2ms injector pulse and back EMF spike
01-fusebox.jpg	Adding start and kill wires to the loom
03-buttons.jpg	Start and Kill buttons
02-relayfitted.jpg	ECU power interrupt relay  installed
11-AshtrayDataslot.jpg	Ashtray from the console, PCB slot from a UPS
13-Console.jpg	Modified console installed in the car.  The tape is to pull the copper clad board out later for etching and drilling.
12-DataSlot.jpg	Interface card slot fitted to console